[autoit 3] 也发一个谷歌翻译修复的工具
本帖最后由 3131210 于 2023-5-15 20:55 编辑下载地址（内含源码打包）：https://wwk.lanzoue.com/b03vgazlc 密码:70r6
每次运行都会从 https://github.com/Ponderfly/GoogleTranslateIpCheck/raw/master/src/GoogleTranslateIpCheck/GoogleTranslateIpCheck/ip.txt 获取最新的IP地址
2023年5月15日 更新
下面是源码
#NoTrayIcon
#RequireAdmin
#Region ;**** 编译指令由 AutoIt3Wrapper 选项编译窗口创建 ****
#AutoIt3Wrapper_Icon=ICON.ico
#AutoIt3Wrapper_UseX64=n
#AutoIt3Wrapper_Outfile=GoogleTranslateFix.exe
#EndRegion ;**** 编译指令由 AutoIt3Wrapper 选项编译窗口创建 ****
#include <Memory.au3>
#include <Array.au3>
#include <WinAPI.au3>
#include <Inet.au3>
Local $dData = _INetGetSource('https://ghproxy.com/https://raw.githubusercontent.com/Ponderfly/GoogleTranslateIpCheck/master/src/GoogleTranslateIpCheck/GoogleTranslateIpCheck/ip.txt', False)
If StringLen(BinaryToString($dData)) Then
Local $sData = StringStripWS(BinaryToString($dData), 1 + 2)
$sData = StringSplit($sData, @CRLF, 2)
Else
MsgBox(0, '提示', ' 没有获取到IP列表，退出程序。')
Exit
EndIf
Global $googlelist, $listcount = 0, $hostsfile = @WindowsDir & '\System32\drivers\etc\hosts'
Global Const $DONT_FRAGMENT = 2, $IP_SUCCESS = 0, $IP_DEST_NET_UNREACHABLE = 11002, $IP_DEST_HOST_UNREACHABLE = 11003, $IP_DEST_PROT_UNREACHABLE = 11004, $IP_DEST_PORT_UNREACHABLE = 11005, _
$IP_NO_RESOURCES = 11006, $IP_HW_ERROR = 11008, $IP_PACKET_TOO_BIG = 11009, $IP_REQ_TIMED_OUT = 11010, $IP_BAD_REQ = 11011, $IP_BAD_ROUTE = 11012, _
$IP_TTL_EXPIRED_TRANSIT = 11013, $IP_TTL_EXPIRED_REASSEM = 11014, $IP_PARAM_PROBLEM = 11015, $IP_SOURCE_QUENCH = 11016, $IP_BAD_DESTINATION = 11018, _
$IP_GENERAL_FAILURE = 11050, $NO_STATUS = 10000 ;We will use 10000 as the no status indicator since 0 meens successful reply
Local $hPointers = DllStructCreate('ptr IcmpCloseHandle;ptr IcmpSendEcho;ptr IcmpCreateFile;ptr ExitThread')
Global $hkernel32Dll = DllOpen('kernel32.dll')
Global $hKrn = _WinAPI_GetModuleHandle('kernel32.dll')
DllStructSetData($hPointers, 'ExitThread', GetProcAddress($hKrn, 'ExitThread'))
Global $hICMPDll = LibLoad('ICMP.dll') ;Iphlpapi.dll')
DllStructSetData($hPointers, 'IcmpCloseHandle', GetProcAddress($hICMPDll, 'IcmpCloseHandle'))
DllStructSetData($hPointers, 'IcmpSendEcho', GetProcAddress($hICMPDll, 'IcmpSendEcho'))
DllStructSetData($hPointers, 'IcmpCreateFile', GetProcAddress($hICMPDll, 'IcmpCreateFile'))
TCPStartup() ;This is required, not only to do DNS lookup, but also for WSAStartup()
Global $pings = ;This array will hold all echo reply data in a struct.
Local $pingdata = 'x'
Local $timeout = 2000
Local $ttl = 255
For $sIp In $sData
pingThreaded($sIp, $timeout, $pingdata, $ttl, $DONT_FRAGMENT)
Next
While $pings > 0
_managePings()
WEnd
If UBound($googlelist) = 0 Then
MsgBox(0, '提示', ' 没有可用IP，退出程序。')
_Exit()
EndIf
_ArraySort($googlelist, 0, 0, 0, 1)
If UBound($googlelist) > 10 Then
_ArrayDisplay($googlelist, '10个最快IP', '9', 64, Default, 'IP|延迟')
$n = 10
Else
_ArrayDisplay($googlelist, '10个最快IP', UBound($googlelist) - 1, 64, Default, 'IP|延迟')
$n = UBound($googlelist)
EndIf
While 1
$sAnswer = InputBox('提示', '输入序号后，会自动修改HOSTS文件，看到HOSTS文件打开后，是已经修改保存过的，关闭即可。' & @CRLF & '一般情况下，1是最快的。')
If @error = 1 Then
_Exit()
ElseIf $sAnswer >= 1 And $sAnswer <= $n Then
If FileExists($hostsfile) = 0 Then
$sfile = FileOpen($hostsfile, 2)
$hostsstr = '# Copyright (c) 1993-2009 Microsoft Corp.' & @CRLF & _
'#' & @CRLF & _
'# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.' & @CRLF & _
'#' & @CRLF & _
'# This file contains the mappings of IP addresses to host names. Each' & @CRLF & _
'# entry should be kept on an individual line. The IP address should' & @CRLF & _
'# be placed in the first column followed by the corresponding host name.' & @CRLF & _
'# The IP address and the host name should be separated by at least one' & @CRLF & _
'# space.' & @CRLF & _
'#' & @CRLF & _
'# Additionally, comments (such as these) may be inserted on individual' & @CRLF & _
'# lines or following the machine name denoted by a ' & Chr(39) & '#' & Chr(39) & ' symbol.' & @CRLF & _
'#' & @CRLF & _
'# For example:' & @CRLF & _
'#' & @CRLF & _
'# 102.54.94.97 rhino.acme.com # source server' & @CRLF & _
'# 38.25.63.10 x.acme.com # x client host' & @CRLF & _
'#' & @CRLF & _
'# localhost name resolution is handled within DNS itself.' & @CRLF & _
'# 127.0.0.1 localhost' & @CRLF & _
'# ::1 localhost' & @CRLF & _
'#' & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.googleapis.com' & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.googleapis.cn' & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.google.com' & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.google.cn' & @CRLF
FileWrite($sfile, $hostsstr)
FileClose($sfile)
Else
FileSetAttrib($hostsfile, '-RSAH')
$sfile = FileOpen($hostsfile, 0)
$hostsstr = FileRead($sfile)
FileClose($sfile)
If StringInStr($hostsstr, 'translate.google') Then
$hostsstr = StringRegExpReplace($hostsstr, '(?mi)\r\n^.+?translate\.google.+?$', '')
EndIf
$hostsstr = StringStripWS($hostsstr, 2) & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.googleapis.com' & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.googleapis.cn' & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.google.com' & @CRLF & _
$googlelist[$sAnswer - 1] & ' translate.google.cn' & @CRLF
EndIf
$sfile = FileOpen($hostsfile, 2)
FileWrite($sfile, $hostsstr)
FileClose($sfile)
Run('notepad.exe ' & $hostsfile)
ExitLoop
Else
MsgBox(0, '警告', '输入错误，请重新输入。')
EndIf
WEnd
_Exit()
;Function pingThreaded
;$ip_addr will accept valid DNS Name or Normal IP address.
;Timouts only really work when an IP isn't responding. Thats important to remember because if you think you can timeout an IP which has latent responces, you can't!
Func pingThreaded($ip_addr, $timeout = 5000, $data = 'x', $ttl = 255, $flags = 0)
Local $hexIP = encodeIP($ip_addr)
If $hexIP == 0 Then Return 0
Local $pingID = _addPing($ip_addr)
If IsNumber($ttl) = 0 Or Number($ttl) > 255 Then $ttl = 255
If IsNumber($timeout) = 0 Or Number($timeout) > 5000 Then $timeout = 5000
If StringLen($data) > 256 Then $data = StringTrimRight($data, StringLen($data) - 256)
If IsNumber($flags) = 0 Or Number($flags) > 2 Then $flags = 2
DllStructSetData($pings[$pingID], 'datasize', StringLen($data)) ;We may wish to report the data size later
;Props to trancexx
Local $CodeBuffer = DllStructCreate('byte') ; Code=154, Data=256, Echo reply Struct + ICMP_OPTIONS Struct = 286
Local $RemoteCode = _MemVirtualAlloc(0, DllStructGetSize($CodeBuffer), $MEM_COMMIT, $PAGE_EXECUTE_READWRITE)
DllStructSetData($CodeBuffer, 1, _
'0x' & _ ;Original Assembly started at 401000
'E889000000' & _ ;Call 0040108E<IcmpCreateFile>
'A3' & SwapEndian($RemoteCode + 410) & _ ;mov dword ptr , eax<hIcmp = IcmpCreateFile Handle>
'C605' & SwapEndian($RemoteCode + 418) & Hex($ttl, 2) & _ ;mov byte ptr , xx <TTL>
'C605' & SwapEndian($RemoteCode + 419) & '00' & _ ;mov byte ptr , 00 <TOS>
'C605' & SwapEndian($RemoteCode + 420) & Hex($flags, 2) & _ ;mov byte ptr , 02 <Flags, 0x02=DF Bit Set>
'C605' & SwapEndian($RemoteCode + 421) & '00' & _ ;mov byte ptr , 00
'C705' & SwapEndian($RemoteCode + 422) & '00000000' & _ ;mov dword ptr , 00000000
'68' & SwapEndian(Dec(Hex($timeout, 4))) & _ ;push 0000xxxx<Timeout>
'681E010000' & _ ;push 0000011E<Size of Echo reply Struct + ICMP_OPTIONS Struct>
'68' & SwapEndian($RemoteCode + 426) & _ ;push 0040302C<icmpReply>
'68' & SwapEndian($RemoteCode + 418) & _ ;push 00403024<icmpOptions>
'6A' & Hex(StringLen($data), 2) & _ ;push 000000xx<Data Size>
'68' & SwapEndian($RemoteCode + 154) & _ ;push 00403000<Data>
'68' & SwapEndian(Dec($hexIP)) & _ ;push <Hex(IP ADDRESS)>
'FF35' & SwapEndian($RemoteCode + 410) & _ ;push dword ptr <hIcmp>
'E839000000' & _ ;Call 00401094<IcmpSendEcho>
'A1' & SwapEndian($RemoteCode + 434) & _ ;mov eax, dword ptr <Get the ms responce time from icmpReply.RoundTripTime>
'A3' & SwapEndian(DllStructGetPtr($pings[$pingID], 'reply')) & _ ;mov dword ptr , eax<Store the ms responce time>
'A1' & SwapEndian($RemoteCode + 430) & _ ;mov eax, dword ptr <Get the status from icmpReply.Status>
'A3' & SwapEndian(DllStructGetPtr($pings[$pingID], 'status')) & _ ;mov dword ptr , eax<Store the status>
'FF35' & SwapEndian($RemoteCode + 410) & _ ;push dword ptr <hIcmp>
'E80E000000' & _ ;Call 00401088<IcmpCloseHandle>
'6A00' & _ ;push 00000000
'E801000000' & _ ;Call 00401082<ExitThread>
'CC' & _ ;int 03
'FF25' & SwapEndian(DllStructGetPtr($hPointers, 'ExitThread')) & _ ;JMP dword ptr<kernel32.ExitThread>
'FF25' & SwapEndian(DllStructGetPtr($hPointers, 'IcmpCloseHandle')) & _ ;JMP dword ptr<ICMP.IcmpCloseHandle>
'FF25' & SwapEndian(DllStructGetPtr($hPointers, 'IcmpCreateFile')) & _ ;JMP dword ptr<ICMP.IcmpCreateFile>
'FF25' & SwapEndian(DllStructGetPtr($hPointers, 'IcmpSendEcho')) & _ ;JMP dword ptr<ICMP.IcmpSendEcho>
SwapEndian(StringToBinary($data)) _ ;This is our ping Data, Max 256 bytes of space here.
)
_MemMoveMemory(DllStructGetPtr($CodeBuffer), $RemoteCode, DllStructGetSize($CodeBuffer))
Local $aCall = DllCall($hkernel32Dll, 'ptr', 'CreateThread', 'ptr', 0, 'int', 0, 'ptr', $RemoteCode, 'ptr', 0, 'int', 0, 'dword*', 0)
Return $aCall
EndFunc ;==>pingThreaded
;Function _addPing is just for array management of the $pings[] array.
Func _addPing($ip_addr)
$pings = UBound($pings)
ReDim $pings[$pings + 1]
$pings[$pings] = DllStructCreate('char ip[' & StringLen($ip_addr) & '];ulong reply;ulong status;int datasize') ;You could add a timeout struct here
DllStructSetData($pings[$pings], 'ip', $ip_addr)
DllStructSetData($pings[$pings], 'status', $NO_STATUS)
Return $pings
EndFunc ;==>_addPing
;Function _removePing is just for array management of the $pings[] array.
Func _removePing($pingID)
If $pingID > $pings Then Return ;Ensure our ID is valid
$pings[$pingID] = 0 ;Free the DLLStruct
_ArrayDelete($pings, $pingID)
$pings -= 1
EndFunc ;==>_removePing
;Function _managePings()
;This is where the reply's get sorted out, and actions taken
Func _managePings()
Local $pingID, $status
$pingID = 1
While $pingID <= $pings
$status = DllStructGetData($pings[$pingID], 'status')
If $status <> $NO_STATUS Then
Switch $status
Case $IP_SUCCESS
$listcount += 1
ReDim $googlelist[$listcount]
$googlelist[$listcount - 1] = DllStructGetData($pings[$pingID], 'ip')
$googlelist[$listcount - 1] = DllStructGetData($pings[$pingID], 'reply')
If DllStructGetData($pings[$pingID], 'reply') = 0 Then
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' replied in <1ms' & @CRLF)
Else
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' replied in ' & DllStructGetData($pings[$pingID], 'reply') & 'ms' & @CRLF)
EndIf
Case $IP_REQ_TIMED_OUT
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' timed-out' & @CRLF)
Case $IP_DEST_NET_UNREACHABLE
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' The destination network was unreachable.' & @CRLF)
Case $IP_DEST_HOST_UNREACHABLE
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' The destination host was unreachable.' & @CRLF)
Case $IP_DEST_PROT_UNREACHABLE
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' The destination protocol was unreachable.' & @CRLF)
Case $IP_DEST_PORT_UNREACHABLE
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' The destination port was unreachable.' & @CRLF)
Case $IP_NO_RESOURCES
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' Insufficient IP resources were available.' & @CRLF)
Case $IP_HW_ERROR
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' A hardware error occurred.' & @CRLF)
Case $IP_PACKET_TOO_BIG
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' The packet was too big.' & @CRLF)
Case $IP_BAD_REQ
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' A bad request.' & @CRLF)
Case $IP_BAD_ROUTE
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' A bad route.' & @CRLF)
Case $IP_TTL_EXPIRED_TRANSIT
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' The time to live (TTL) expired in transit.' & @CRLF)
Case $IP_TTL_EXPIRED_REASSEM
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' The time to live expired during fragment reassembly.' & @CRLF)
Case $IP_PARAM_PROBLEM
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' A parameter problem.' & @CRLF)
Case $IP_SOURCE_QUENCH
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' Datagrams are arriving too fast to be processed and datagrams may have been discarded.' & @CRLF)
Case $IP_BAD_DESTINATION
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' A bad destination.' & @CRLF)
Case $IP_GENERAL_FAILURE
ConsoleWrite('Ping with ' & DllStructGetData($pings[$pingID], 'datasize') & ' byte(s) to ' & DllStructGetData($pings[$pingID], 'ip') & ' A general failure. This error can be returned for some malformed ICMP packets or lost network connection.' & @CRLF)
EndSwitch
_removePing($pingID)
EndIf
; You may wish to include a feature which can timeout manually here. Just remember if you do that, do not destroy the dllstruct for the ping
; because likelly the ping thread will still write to it when it's done.You will have to wait for that to happen before you destroy it.
$pingID += 1
WEnd
EndFunc ;==>_managePings
;~ 使用到的常量：
;~ Const ICMP_SUCCESS = 0 ‘成功
;~ Const ICMP_STATUS_BUFFER_TO_SMALL = 11001 '缓存太小
;~ Const ICMP_STATUS_DESTINATION_NET_UNREACH = 11002 '目的地网络不能到达
;~ Const ICMP_STATUS_DESTINATION_HOST_UNREACH = 11003 '目的地主机不能到达
;~ Const ICMP_STATUS_DESTINATION_PROTOCOL_UNREACH = 11004 '目的地协议不能到达
;~ Const ICMP_STATUS_DESTINATION_PORT_UNREACH = 11005 '目的地端口不能到达
;~ Const ICMP_STATUS_NO_RESOURCE = 11006 '没有资源
;~ Const ICMP_STATUS_BAD_OPTION = 11007 '错误选项
;~ Const ICMP_STATUS_HARDWARE_ERROR = 11008 '硬件错误
;~ Const ICMP_STATUS_LARGE_PACKET = 11009 '信息包太大
;~ Const ICMP_STATUS_REQUEST_TIMED_OUT = 11010 '请求超时
;~ Const ICMP_STATUS_BAD_REQUEST = 11011 '错误请求
;~ Const ICMP_STATUS_BAD_ROUTE = 11012 '错误路由
;~ Const ICMP_STATUS_TTL_EXPIRED_TRANSIT = 11013 'TTL终止传输
;~ Const ICMP_STATUS_TTL_EXPIRED_REASSEMBLY = 11014 'TTL终止重新组装
;~ Const ICMP_STATUS_PARAMETER = 11015 '参数有问题
;~ Const ICMP_STATUS_SOURCE_QUENCH = 11016 '资源结束
;~ Const ICMP_STATUS_OPTION_TOO_BIG = 11017 '选项太大
;~ Const ICMP_STATUS_BAD_DESTINATION = 11018 '错误目的地
;~ Const ICMP_STATUS_NEGOTIATING_IPSEC = 11032 '谈判IPSEC
;~ Const ICMP_STATUS_GENERAL_FAILURE = 11050 '常规失败
Func encodeIP($ip_addr)
Local $ip_addr_temp = $ip_addr
If Not _isIP($ip_addr) Then $ip_addr = TCPNameToIP($ip_addr)
If Not _isIP($ip_addr) Then
ConsoleWrite($ip_addr_temp & ' is not a valid IP Address. If you supplied a hostname ensure DNS is available.' & @CRLF)
Return 0
EndIf
Return getHexIP($ip_addr)
EndFunc ;==>encodeIP
Func getHexIP($ip_addr)
Return Hex(_getIPOctet($ip_addr, 4), 2) & Hex(_getIPOctet($ip_addr, 3), 2) & Hex(_getIPOctet($ip_addr, 2), 2) & Hex(_getIPOctet($ip_addr, 1), 2)
EndFunc ;==>getHexIP
Func LibLoad($lpLibFileName)
Local $LibHandle = DllCall($hkernel32Dll, 'int', 'LoadLibraryA', 'str', $lpLibFileName)
Return $LibHandle
EndFunc ;==>LibLoad
Func LibFree($DllHandle)
Local $LibFreed = DllCall($hkernel32Dll, 'int', 'FreeLibrary', 'int', $DllHandle)
Return $LibFreed
EndFunc ;==>LibFree
Func GetProcAddress($hModule, $lpProcName)
Local $ProcessAddy = DllCall($hkernel32Dll, 'int', 'GetProcAddress', 'int', $hModule, 'str', $lpProcName)
Return $ProcessAddy
EndFunc ;==>GetProcAddress
Func SwapEndian($hex)
;trancexx
Return Hex(Binary($hex))
EndFunc ;==>SwapEndian
Func _getIPOctet($ip_addr, $octet = 1)
Switch $octet
Case 1
Return Int(StringMid($ip_addr, 1, StringInStr($ip_addr, '.')))
Case 4
Return Int(StringMid($ip_addr, StringInStr($ip_addr, '.', 0, 3) + 1))
Case Else
Return Int(StringMid($ip_addr, StringInStr($ip_addr, '.', 0, $octet - 1) + 1, StringInStr($ip_addr, '.', 0, $octet) + 1))
EndSwitch
EndFunc ;==>_getIPOctet
Func _isIP($text)
Return StringRegExp($text, '(((25)|(2)|(1)|(?))\.){3}((25)|(2)|(1)|(?))')
EndFunc ;==>_isIP
Func _Exit()
TCPShutdown()
LibFree($hICMPDll)
DllClose($hkernel32Dll)
Exit
EndFunc ;==>_Exit
感谢分享，之前网上也找了一些方法，但用不了多久。试一试这个 感谢楼主分享 很有用 autoit3代码论坛比较少，楼主多发点，挺实用的！ 长期来看，谷歌翻译真的还有救么…… 感谢分享，学习学习！ 挺不错的。。。 很好，很实用 能用吗，一直没有解决